Apeks Wtx3 Buoyancy Cell

Apeks WTX3 Buoyancy Cell

This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.

• Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3.
• 4 slots allow it to be mounted to a WTX harness or back plate using & upper & lower nylon cylinder bands.
• 2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used.
• A 2” wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn’t get pushed away from your body.
• A 2” D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy.
• The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose.
• Features the Apeks technical inflator with brass buttons
• Includes front, lower left pull dump
• Constructed from durable 840-denier nylon.

1.26kg dry weight