Details
Stormsure Neoprene Queen Repair
Repair adhesive with patches. Suitabe for all wetsuits to repair any rips & tears in only 10 minutes!
Can prove to be a very important piece of equipment first aid when diving frequently. Can ensure that your wetsuits & drysuits are useable continuously regardless of minor damage.
Directions for use
Without Patch: Clean the damaged area. Apply a thin layer of Neoprene Queen adhesive to both the edges of the ripped neoprene. It should become touch dry in three minutes. Apply a second thin layer of adhesive again. Wait for it to become touch dry again. Then carefully align the edges and press them firmly together. Hold for a further two minutes under pressure.
The repair is now finished and ready for use. The bond achieves full strength after 24 hours but wetsuits can be used with care immediately.
With Patch: To apply a patch of neoprene over a damaged area. Ensure both patch and damaged area are clean. Apply Neoprene Queen adhesive to the back of the patch and also to the damaged area. Ensure full coverage. Allow to become touch dry for three minutes. Apply a scond layer of adhesive and allow to dry.
Carefully place the patch on to the daamaged area and apply heavy pressure to the patch for two minnutes. The bond achieves full strength after 24 hours but wetsuits can be used with care immediately.
Caution!
- Keep away from children.
- Use in a well ventilated space.
- Highly inflammable.
- Keep away from naked flames.
