Details
MARES KALIA MRS BCD
Designed by women for women
• Fashionable design with female dedicated cut
• Internal plush lining with padded neoprene neck collar
• Dual adjustable shoulder straps to accommodate various torso lengths
Kaila means “Style” in Hawaiian. The elegant female diver who wants function and comfort allied with style
and distinction wants Kaila. The sleek Dragon bladder design positions some air towards the back providing
ample lift. Slender front shape gives comfortable surface fl oatation, without the balloon sensation.
Features
Dual adjustable shoulder straps to adapt to different torso lengths.
QAS
MRS Plus
Trim Weights holding up to 4.5kg/10lbs total
BPS Plus
Elastic cummerbund
AISI 304 stainless steel rings 304,
2 zippered pockets are angled for ease of opening and closing.
Neoprene padded collar
Interior plush lined.
Shoulder straps designed to relieve pressure on the shoulders.
Adjustable chest strap
Two rear quick dump/over-expansion relief valves
Dual position hose clip for your gauges
Sizing
| Chest (inches) | Chest (cm) | UK Dress | |
| Extra Small | 32-34 | 81-86 | 8-10 |
| Small | 34-36 | 86-91 | 10-12 |
| Medium | 36-38 | 91-97 | 12 |
| Medium Large | 39 | 100 | 12-14 |
| Large | 38-40 | 97-102 | 14-16 |
| Extra Large | 40+ | 102+ | 16-18 |
* approx size ranges, not all sizes available in each model. Base measurement over exposure protection.
Apeks XTX40 Regulator with DST First Stage
The XTX40 regulator can be converted from a right handed hose configuration (as supplied from the APEKS factory in the standard) to a left handed one.
This feature is known as the Reversible Venturi System (RVS). Changing the regulator to a left handed configuration is both quick and simple and can be performed by any APEKS Authorised Service Technician.
The XTX40 regulator incorporates the new feature of Diver Changeable Exhausts system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice of the wider exhaust tee for minimal bubble interference(essential for underwater photography) and the narrow exhaust tee for a smaller compact comfortable regulator (ideal for use as an octopus regulator).
The XTX40 regulator incorporates a new two-shot high strength plastic front cover, improving the durability of the most vulnerable part of the demand valve.
The new ergonomic Venturi lever of the XTX40 has been designed to reduce the amount of grit ingress.
A new silicone exhaust valve has been used on the XTX40 regulator improving breathing performance.
Specification
First Stage
Swivel turret body
4 medium pressure ports, 4 x 3/8" UNF
2 high pressure ports, 2 x 7/16" UNF
Environmentally dry sealed system
Polished chrome finish
Balanced for superior performance
Second Stage
Integrated venturi control
Pneumatically balanced valve design
Suitable for cold water use
Bright Chrome Finish
Right or Left hand hose configuration
Two shot plastic front cover
Changeable Exhaust Tees (DCE, Diver Changeable Exhaust) (only one set supplied)
Nitrox and Octopus versions available
